Error code list for Miele dishwasher

F01
Cause:
Temperature error.
Solution:
Replace the thermostat.
F02
Cause:
Temperature error.
Solution:
Replace the thermostat.
F3E
Cause:
Water in dishwasher base.
Solution:
The error code usually occurs due to a leak. To find the spare part that causes the error, you can follow the limescale trace. Replace the faulty spare part.
F08
Cause:
Wash motor error.
Solution:
Replace the wash motor.
Circulation pump
F11
Cause:
Cannot drain water.
Solution:
Replace the drain pump.
Drain pump
F12
Cause:
Water supply error.
Solution:
Replace the aquastop.
Aquastop
F13
Cause:
Water supply error.
Solution:
Replace the aquastop.
Aquastop
F14
Cause:
Water supply error.
Solution:
Replace the aquastop.
Aquastop
F15
Cause:
Water temperature too high or water supply error.
Solution:
The error code may be due to the dishwasher being connected to the hot water tap. Connect to cold water tap instead. The error code can also be caused by no water entering the dishwasher at all. Start by checking that water comes out of the tap at the connection point. If it does, the lack of water is probably due to a faulty solenoid valve or aquastop. You can find a new solenoid valve here and a new aquastop here. If the dishwasher takes in water, the fault may be due to the level control, which measures the water level, being faulty. Be aware that on older dishwashers the level control is analogue, in which case you can just replace it. However, on newer dishwashers the level control is part of the print/control and in this case you will therefore need to replace this. Contact us if you are in doubt - remember to provide as much information as possible from the dishwasher's data plate.
F18
Cause:
Flow sensor error.
Solution:
Replace the flow sensor.
F19
Cause:
Flow sensor error.
Solution:
Replace the flow sensor.
F24
Cause:
Heater relay error.
Solution:
The error code is usually due to the heater relay being faulty. Contact us here for price and link to new heater relay.
F25
Cause:
Temperature error.
Solution:
Replace the thermostat.
F26
Cause:
Water temperature too high or water supply error.
Solution:
The error code may be due to the dishwasher being connected to the hot water tap. Connect to cold water tap instead. The error code can also be caused by no water entering the dishwasher at all. Start by checking that water comes out of the tap at the connection point. If it does, the lack of water is probably due to a faulty solenoid valve or aquastop. You can find a new solenoid valve here and a new aquastop here. If the dishwasher takes in water, the fault may be due to the level control, which measures the water level, being faulty.
F40
Cause:
Electronics error.
Solution:
An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.
F51
Cause:
Water level error.
Solution:
Replace the level sensor.
Level switch
F52
Cause:
Water level error.
Solution:
Replace the level sensor.
Level switch
F67
Cause:
Wash motor error.
Solution:
Replace the wash motor.
Circulation pump
F68
Cause:
Wash motor error.
Solution:
Replace the wash motor.
Circulation pump
F69
Cause:
Wash motor error.
Solution:
Replace the wash motor.
Circulation pump
F70
Cause:
Water in dishwasher base.
Solution:
Replace the drain pump.
Drain pump
F78
Cause:
Wash motor error.
Solution:
Replace the wash motor.
Circulation pump
F88
Cause:
Turbidity sensor error.
Solution:
Replace the turbidity sensor.

Professional dishwasher gel (500 ml)
This professional dishwasher gel is a sublime alternative to traditional dishwashing detergents, which difficultly dissolves completely, resulting in soap residue on the dishes. Especially with newer dishwashers, which are hugely water-saving, you may experience soap residue. You will avoid that with this smart dishwasher gel – the gel is so easily soluble that soap residue on dishes is a thing of the past! The dishwasher gel is also easy to dose - simply press lightly on the bottle and let approx. 20 ml out per wash. Many dishwashers have a measuring unit on the soap container, but if yours doesn't, it roughly corresponds to a large tablespoon.

In addition, always ensure that there is salt and rinse aid in the dishwasher. Salt, rinse aid and soap, in interaction with each other, ensure the most optimal dishwashing result.
4.95GBP
In stock. Del 2-3 work days.
Read more.

Cookie information

Error code list for Miele dishwasher

F01

Cause:

Solution:

F02

Cause:

Solution:

F3E

Cause:

Solution:

F08

Cause:

Solution:

F11

Cause:

Solution:

F12

Cause:

Solution:

F13

Cause:

Solution:

F14

Cause:

Solution:

F15

Cause:

Solution:

F18

Cause:

Solution:

F19

Cause:

Solution:

F24

Cause:

Solution:

F25

Cause:

Solution:

F26

Cause:

Solution:

F40

Cause:

Solution:

F51

Cause:

Solution:

F52

Cause:

Solution:

F67

Cause:

Solution:

F68

Cause:

Solution:

F69

Cause:

Solution:

F70

Cause:

Solution:

F78

Cause:

Solution:

F88

Cause:

Solution: