Heating element, Electrolux dishwasher - 230V/2000W

PLEASE NOTE:
If the machine is still washing with cold water (and can implement the program) then there may be a fault with the controller. This can be corrected with a little solder and a soldering iron. And that´s without
new parts!

Open the door and remove the screws in the top half of the door. Behind the buttons on the door is a plastic box where the electronics are located. (Hint: Take a picture with a digital camera of the wires first before pulling them out of the controller, that way it will be easier to remember the order).

Often you will see a dark spot on the PCB. This is where you will need to solder-- Use a piece of tinned wire to create the new connection.

ESF4120
ESF4130

ESF6221
ESF6124
ESF6124X

ESF6136
ESF6224
ESF6231
ESF6543X
ESF6246
ESF6549

ESF46010

and other models…