Cookie information

We use cookies. Some for basic functions, others for statistical use and improvement of the user experience. Cookies are also used for ads personalisation. Read more in our cookie policy.

Chat weekdays 8am - 9pm
Shipments Weekdays 4.30pm
Guidance all weekdays
Delivery All weekdays

Error code list for Samsung washing machine

  • 1E

    Cause:

    Level sensor error.

    Solution:

    Replace the level sensor.

  • 1LC

    Cause:

    Level sensor error.

    Solution:

    Replace the level sensor.

  • 3E

    Cause:

    Motor error.

    Solution:

    Replace the motor.

  • 4E

    Cause:

    Water supply error.

    Solution:

    Replace the level sensor.

  • 4C

    Cause:

    Water supply error.

    Solution:

    Replace the level sensor.

  • 4ED

    Cause:

    Temperature error.

    Solution:

    Replace the NTC sensor.

  • 5E

    Cause:

    Cannot drain water.

    Solution:

    Replace the drain pump.

  • 6E

    Cause:

    Heating element error.

    Solution:

    Replace the heating element.

  • 8E

    Cause:

    Overcurrent error

    Solution:

    Unplug the cord from the outlet and plug it back in after 30 seconds. If this does not solve the problem, it is possible that the error it is due to a motor fault. Check the motor and carbon brushes.

  • 11E

    Cause:

    Water level error.

    Solution:

    The error code is usually due to the drain hose hanging too low. Make sure the drain hose is connected above drain height and that it makes an upward arc. You can buy a drain hose holder here.

  • 12E

    Cause:

    Power button error.

    Solution:

    The error code is due to a detection of the power button being held down for more than 13 seconds. Release the power button. If that doesn't fix the problem, replace the power button.

  • 13E

    Cause:

    Communication error.

    Solution:

    The error code is usually due to a lack of connection between the main control module and other control modules. Check for loose connections.

  • 14E

    Cause:

    Function selector error.

    Solution:

    The error code is due to a detection of one of the buttons (not the power button) being held down for more than 13 seconds. Loosen the buttons. If that does not solve the problem, then replace the button that is stuck.

  • 3E1

    Cause:

    Motor overload.

    Solution:

    The error code is most often caused by too much laundry in the machine, but can also be caused by a faulty control module.

  • 4E1

    Cause:

    Temperature error.

    Solution:

    Replace the NTC sensor.

  • 9E1

    Cause:

    Power error.

    Solution:

    Check the power cord and voltage.

  • 3E2

    Cause:

    Motor error.

    Solution:

    Replace the PCB.

  • 9E2

    Cause:

    Power error.

    Solution:

    Check the power cord and voltage.

  • 3E3

    Cause:

    Electronics error.

    Solution:

    An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.

  • 3E4

    Cause:

    Electronics error.

    Solution:

    An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.

  • AE

    Cause:

    Communication error.

    Solution:

    The error code is usually due to a lack of connection between the main control module and other control modules. Check for loose connections.

  • BE1

    Cause:

    Power button error.

    Solution:

    The error code is due to a detection of the power button being held down for more than 13 seconds. Release the power button. If that doesn't fix the problem, replace the power button.

  • BE2

    Cause:

    Function selector error.

    Solution:

    The error code is due to a detection of one of the buttons (not the power button) being held down for more than 13 seconds. Loosen the buttons. If that does not solve the problem, then replace the button that is stuck.

  • BE

    Cause:

    TRIAC-error.

    Solution:

    Unplug the cord from the outlet and plug it back in after 30 seconds. If this does not solve the problem, the error is probably caused by a faulty PCB module. Replace the PCB module.

  • CE

    Cause:

    Water temperature error.

    Solution:

    The error code is due to the water temperature being too high. The error usually indicates that the supply hose is connected to the hot water tap. Connect the hose to the cold water tap instead.

  • DC

    Cause:

    Door is open.

    Solution:

    Replace the door lock.

  • DE1

    Cause:

    Door is open.

    Solution:

    Replace the door lock.

  • DE2

    Cause:

    On/off button error.

    Solution:

    The error code is usually caused by the button overheating due to repeated pushing.

  • DE

    Cause:

    Door is open.

    Solution:

    Replace the door lock.

  • E1

    Cause:

    Water supply error.

    Solution:

    If the washing machine does not take in water at all, the fault code is probably due to a faulty solenoid valve. You can find a new solenoid valve here. If the washing machine takes in water, the error is probably due to the level control, which detects the water level, being faulty and needs to be replaced. Be aware that on older washing machines the level control is analogue, in which case you can just replace it. However, on newer washing machines the level control is part of the print/control and in this case you will therefore need to replace this. Contact us if you are in doubt - remember to provide as much information as possible from the washing machine's data plate.

  • E2

    Cause:

    Cannot drain water.

    Solution:

    Replace the drain pump.

  • E3

    Cause:

    Too much detergent.

    Solution:

    The error code usually occurs if foam is formed due to too much detergent. In this case, the foam will be able to come out through the soap compartment. Use less soap when washing.

  • E4

    Cause:

    Imbalance detected.

    Solution:

    Replace the door lock.

  • E5

    Cause:

    Heating error.

    Solution:

    Replace the heating element.

  • E7

    Cause:

    Level sensor error.

    Solution:

    Replace the level sensor.

  • E8

    Cause:

    Water temperature error.

    Solution:

    The error code is due to the water temperature being too high. The error usually indicates that the supply hose is connected to the hot water tap. Connect the hose to the cold water tap instead.

  • E9

    Cause:

    Water level error.

    Solution:

    The error code is usually due to the drain hose hanging too low. Make sure the drain hose is connected above drain height and that it makes an upward arc. You can buy a drain hose holder here.

  • EA

    Cause:

    Motor error.

    Solution:

    The error code can be caused by several different defects. We recommend you search for symptoms via our troubleshooting pages.

  • EB

    Cause:

    Motor error.

    Solution:

    The error code can be caused by several different defects. We recommend you search for symptoms via our troubleshooting pages.

  • EC

    Cause:

    Thermostat or temperature sensor error.

    Solution:

    Replace the thermostat.

  • ED

    Cause:

    Door is open.

    Solution:

    Replace the door lock.

  • H1

    Cause:

    Thermostat or temperature sensor error.

    Solution:

    Replace the thermostat.

  • HE1

    Cause:

    Heating error.

    Solution:

    Replace the heating element.

  • HE

    Cause:

    Water temperature error.

    Solution:

    The error code is due to the water temperature being too high. The error usually indicates that the supply hose is connected to the hot water tap. Connect the hose to the cold water tap instead.

  • LE1

    Cause:

    Water level error.

    Solution:

    Replace the drain pump.

  • LE

    Cause:

    Water level error.

    Solution:

    The error code is usually due to the drain hose hanging too low. Make sure the drain hose is connected above drain height and that it makes an upward arc. You can buy a drain hose holder here.

  • OE

    Cause:

    Too much detergent.

    Solution:

    The error code usually occurs if foam is formed due to too much detergent. In this case, the foam will be able to come out through the soap compartment. Use less soap when washing.

  • OF

    Cause:

    Overfill error.

    Solution:

    The error code usually occurs when there is too much water in the washing machine. Too much water in the washing machine can happen due to a faulty solenoid valve or aquastop. You can find a new solenoid valve here and a new aquastop here. If your washing machine is not overfilling with water, it is more likely that the level control, which detects the water level, is faulty. You can find a new level control here.

  • PH1

    Cause:

    Power error.

    Solution:

    Check the power cord and voltage.

  • PLO

    Cause:

    Power error.

    Solution:

    Check the power cord and voltage.

  • SUD

    Cause:

    Excess foam detected.

    Solution:

    Clean the filter. If this does not solve the problem, you can try running the 'Eco drum clean' program or a wash at 90°C without detergent. If the error code continues to appear after this, it is possible that it is due to a defective drain pump. Replace the pump if necessary.

  • T1

    Cause:

    The machine is in test mode

    Solution:

    Unplug the cord from the outlet and plug it back in after 30 seconds.

  • T2

    Cause:

    The machine is in test mode

    Solution:

    Unplug the cord from the outlet and plug it back in after 30 seconds.

  • TE1

    Cause:

    Thermostat or temperature sensor error.

    Solution:

    Replace the thermostat.

  • TE

    Cause:

    Thermostat or temperature sensor error.

    Solution:

    Replace the thermostat.

  • TST

    Cause:

    The machine is in test mode

    Solution:

    Unplug the cord from the outlet and plug it back in after 30 seconds.

  • UC

    Cause:

    Power error.

    Solution:

    Check the power cord and voltage. Unplug the cord from the outlet and plug it back in after 5 minutes.

  • UE

    Cause:

    Imbalance detected.

    Solution:

    Replace the door lock.

1
  • Professional machine cleaner for washing machines (500 ml)
    Our professional machine wash for washing machines is a specially developed product that ensures effective cleaning of your washing machine. With regular use, this product can remove limescale, soap scum and accumulated dirt. The result is a clean and fresh machine that performs optimally and has a longer service life.

    Why use Professional Machine Cleaner?
    Detergent ensures that your clothes are washed clean, but it does not ensure that the washing machine is kept clean. On the contrary, the detergent accumulates over time in your washing machine and can result in a smelly machine. It is therefore important that you occasionally use machine cleaners that clean the washing machine deeply and leave it clean and fragrant.

    Here's how to do it:
    1. Empty the washing machine of clothes.
    2. Pour 2 dl into the soap box. Run a program at 40°C without prewash.
    3. Repeat the process regularly, preferably once a month, to keep the machine in top shape.
    17.95GBP
    In stock. Del 2-3 work days.
    Read more.
   

Shopping basket
No items in your basket.
Item total: GBP
Delivery
Edit basketProceed to checkout
0
GBP
Delivery: